CW6180/CW61100
Standard general manual machine description
This series of lathes is suitable for all kinds of turning work, such as turning inside and outside cylindrical surface, conical surface, other turning surface, end face, but also processing a variety of commonly used threads - such as metric, inch, modulus, diameter thread and drilling, Tapping, tipping trunking and so on. The machine can be processed steel, cast iron and non-ferrous metals and other materials. When the machine is finished, the roundness error is not more than 0.01mm, the cylinder degree error is not more than 0.04mm in the measuring length of 300mm; the torsion plane bed, the high quality cast iron is carefully manufactured and the induction hardening of the guide surface is precision, Bed width of 600mm; by the Teflon rail flexible rail composed of rails wear-resistant, vibration absorption, precision retention is good; spindle with three support structure, high rigidity, high precision, can be strong cutting. Spindle through the hole for the Ф100mm large hole; 18 wide speed range, you can choose a more reasonable speed; can be directly turning metric and inch thread; slide box has a fast moving body.
|
ITEM |
UNIT |
CW6180 |
CW61100 |
|
CAPACITIES |
|||
|
Swing over bed |
mm |
800 |
1000 |
|
Swing over carriage |
mm |
480 |
680 |
|
Max.length of workpiece |
mm |
1500 2000 3000 4000 5000 6000 |
|
|
Max.turning length |
mm |
1350 1850 2850 3850 4850 5850 |
|
|
Pan of guideway |
mm |
600 |
|
|
SPINDLE |
|||
|
Spindle nose |
mm |
C11(C15 optional) |
|
|
Spindle bore |
mm |
100(140 optional) |
|
|
Taper hole of spindle |
1:20 |
||
|
Range of spindle speeds |
r/min |
forward：6~750 reverse：10~775 |
|
|
No.of spindle speeds |
18/6 |
||
|
FEED |
|||
|
Longitudinal and cross |
64；0.1~24.32 |
||
|
Cross/long longitudinal feed |
1/2 |
||
|
Screw pitch of leadscrew |
mm |
12 |
|
|
No. and range of metric thread |
50 ;1~240 |
||
|
No. and range of inch thread |
26 ；14~1 |
||
|
No. and range of module thread |
53 ；0.5~120 |
||
|
No. and range of dia. thread |
24 ；28~1 |
||
|
Rapid traverse speed |
mm/min |
4000 |
|
|
TURRET |
|||
|
Distance of spindle and tool plane |
mm |
33 |
|
|
Tool post swing range |
° |
±90° |
|
|
Max.travel of cross slide |
mm |
500 |
|
|
Max.travel of top slide |
mm |
200 |
|
|
Section of tool shank |
mm |
32（202x202） |
|
|
TAILSTOCK |
|||
|
Dia. of tailstock |
mm |
100 |
|
|
Travel of tailstock quill |
mm |
250 |
|
|
Taper hole of tailstock quill |
morse6 |
||
|
OTHERS |
|||
|
Main motor power |
kw |
11 |
|
|
Length |
mm |
3670 3985 5165 6220 7400 8260 |
|
|
Width |
mm |
1730 |
|
|
Height |
mm |
1450 |
|
Skype : smileyge
E-mail:smileyge@263.net
jimge89@163.com
Wechat:0086-13606292871
0086-15051255578
