CW6163B/CW6263B
General manual machine description
This series of lathes can be used for a variety of turning work, such as turning inside and outside cylindrical surface, conical surface, and other turning surface, face, but also processing a variety of commonly used threads - such as metric, inch, modulus, diameter thread, , Hinge, tapping, tipping trunking and so on. Machine round car specimen, the roundness error is not greater than 0.01mm (the maximum diameter of the bed is greater than 800 when the 0.02), cylindrical error in the 300mm measurement length of not more than 0.04mm. High torsion-resistant flat bed, high-quality cast iron carefully manufactured, and induction on the rail surface quenching precision treatment, bed width 550mm; by the sticky PTFE conductive rails composed of flexible rails wear, vibration, precision retention Good; spindle with three support structure, high rigidity, high precision, can be strong cutting. Spindle through the hole for the Ф100mm large hole; 18 wide speed range, you can choose a more reasonable speed; can be directly turning metric and inch thread; slide box has a fast moving body.
|
ITEM |
UNIT |
CW6163B/CW6263B |
CW6180B/CW6280B |
CW6194B/CW6294B |
|
CAPACITIES |
||||
|
Swing over bed |
mm |
630 |
800 |
940 |
|
Swing over carriage |
mm |
350 |
520 |
660 |
|
Max.length of workpiece |
mm |
750 1000 1500 2000 3000 4000 5000 6000 8000 10000 |
||
|
Max.turning length |
mm |
600 850 1350 1850 2850 3850 4850 5850 7850 9850 |
||
|
Swing over gap |
mm |
830 |
1000 |
1140 |
|
Effective widthof gap |
mm |
300 |
||
|
Pan of guideway |
mm |
550 |
||
|
SPINDLE |
||||
|
Spindle nose |
C11 |
|||
|
Spindle bore |
mm |
100 |
||
|
Taper hole of spindle |
1:20/120 |
|||
|
Range of spindle speeds |
r/min |
7.5~1000 |
6~800 |
6~800 |
|
No.of spindle speeds |
18 |
|||
|
FEED |
||||
|
Longitudinal and cross |
r/min |
64;0.1~24.32 |
||
|
Cross/long longitudinal feed |
1/2 |
|||
|
Screw pitch of leadscrew |
mm |
12 |
||
|
No. and range of metric thread |
mm |
50;1~240 |
||
|
No. and range of inch thread |
26;14~1 |
|||
|
No. and range of module thread |
mm |
53;0.5~120 |
||
|
No. and range of dia. thread |
24;28~1 |
|||
|
Rapid traverse speed |
mm/min |
4000 |
||
|
TURRET |
||||
|
Max.travel of cross slide |
mm |
440 |
540 |
570 |
|
Max.travel of top slide |
mm |
200 |
||
|
Section of tool shank |
mm |
32（192x192） |
||
|
TAILSTOCK |
||||
|
Dia. of tailstock |
mm |
100 |
||
|
Travel of tailstock quill |
mm |
250 |
||
|
Taper hole of tailstock quill |
mores 5 |
|||
|
OTHERS |
||||
|
Main motor power |
kw |
11 |
||
|
Length |
mm |
2958 3275 3725 4225 5225 6275 7355 8355 10275 12275 |
||
|
Width |
mm |
1393 |
1473 |
1430 |
|
Height |
mm |
1537 |
1622 |
1690 |
Skype : smileyge
E-mail:smileyge@263.net
jimge89@163.com
Wechat:0086-13606292871
0086-15051255578
